FC - Application on Decorative Surfaces (ENG)
Decorative interior walls in dry areas with Monostone (Rockplaster) or Microquartz: primer, cement and sealer.
Updated
by tomas martinsson
Tradesperson Guide / Decorative Surfaces
Application: Decorative Surfaces
Practical guide for build-up, primer selection, and application of Monostone / Rockplaster and Microquartz onto internal decorative feature walls.
🛑 Before commencing the project:
• Sample Board: Always create a test sample measuring at least 60×60 cm in the correct color and texture for client sign-off prior to starting.
• Substrate Inspection: The surface must be sound, structurally stable, completely dry, and free from dust or grease.
• Dry Areas Only: These 2-coat specifications without reinforcement mesh are strictly reserved for internal decorative walls (not wetrooms or water-bearing areas).
• Sample Board: Always create a test sample measuring at least 60×60 cm in the correct color and texture for client sign-off prior to starting.
• Substrate Inspection: The surface must be sound, structurally stable, completely dry, and free from dust or grease.
• Dry Areas Only: These 2-coat specifications without reinforcement mesh are strictly reserved for internal decorative walls (not wetrooms or water-bearing areas).
💡 Final Finish Selection:
• Monostone / Rockplaster: Ready-mixed, 1-component microcement. Rockplaster XL produces a rustic, textured profile, whereas Rockplaster L creates a smoother, more refined surface.
• Microquartz: 2-component microcement providing a highly durable, mineral aggregate aesthetic available in Coarse, Medium, or Smooth grades.
• Monostone / Rockplaster: Ready-mixed, 1-component microcement. Rockplaster XL produces a rustic, textured profile, whereas Rockplaster L creates a smoother, more refined surface.
• Microquartz: 2-component microcement providing a highly durable, mineral aggregate aesthetic available in Coarse, Medium, or Smooth grades.
1. Primer Selection
Primers for Monostone / Rockplaster
• Monogrip: For painted surfaces or normally absorbent backgrounds.
• Monoprime: For bare plasterboard, gypsum boards, or highly porous materials.
• Roll out a uniform coat and allow to dry for 30–60 minutes to an abrasive, tack-free key before skimming.
• Monoprime: For bare plasterboard, gypsum boards, or highly porous materials.
• Roll out a uniform coat and allow to dry for 30–60 minutes to an abrasive, tack-free key before skimming.
Primers for Microquartz
• Forprime EPWB: Water-based epoxy primer. Roll apply evenly without puddling.
• Forprime DPM + Sand: 2K epoxy primer. Roll apply and broadcast quartz sand to full saturation.
• Select primer suited to the substrate and desired timeline.
• Forprime DPM + Sand: 2K epoxy primer. Roll apply and broadcast quartz sand to full saturation.
• Select primer suited to the substrate and desired timeline.
2. Build-up & Application
Option 1: Monostone / Rockplaster
Fast 1-component microcement system (XL & L).
1. Coat 1: Trowel out the first coat to the aggregate thickness. Smooth over using a flexible blade to minimize burrs and ridges.
2. Drying Time: Assisted with drying fans, Coat 2 can be applied after 1–2 hours. On larger areas, Coat 2 is typically troweled the following day.
3. Coat 2: If smoothed with a flexible blade, intermediate sanding is not needed when recoating the same day. Trowel Coat 2 and manipulate the surface while workable to create the desired texture.
2. Drying Time: Assisted with drying fans, Coat 2 can be applied after 1–2 hours. On larger areas, Coat 2 is typically troweled the following day.
3. Coat 2: If smoothed with a flexible blade, intermediate sanding is not needed when recoating the same day. Trowel Coat 2 and manipulate the surface while workable to create the desired texture.
Option 2: Microquartz
2-component system with superior hardness and abrasion resistance.
1. Coat 1 (over EPWB): Trowel the first coat of Microquartz between 30 minutes minimum and 120 minutes maximum after primer rolling.
2. Coat 1 (over DPM + sand): Sweep excess sand, vacuum, and trowel after a minimum of 6 hours primer cure.
3. Coat 2: Allow Coat 1 to cure for 24 hours (overnight). Lightly intermediate sand, vacuum thoroughly, and apply the final decorative coat.
2. Coat 1 (over DPM + sand): Sweep excess sand, vacuum, and trowel after a minimum of 6 hours primer cure.
3. Coat 2: Allow Coat 1 to cure for 24 hours (overnight). Lightly intermediate sand, vacuum thoroughly, and apply the final decorative coat.
3. Final Sanding & Sealing
Once the final coat has dried, sand lightly to the desired tactile profile, vacuum thoroughly, and wipe with a microfiber cloth prior to sealing (2 coats of topcoat sealer).
4. Workflow & Day-by-Day Schedule
📑 Handover to Client: Always supply care and maintenance instructions to the client following completion to ensure the surface is maintained correctly using recommended pH-neutral cleaning products.
How did we do?
FC - Application in Bathrooms (ENG)
FC - Application on Tiled Floors (ENG)