Skip to main content

FC - Monogrip (ENG)

Water-based grip primer with fine sand that gives Monostone a key on tiles, painted surfaces and vinyl.

tomas martinsson
Updated by tomas martinsson
Guide / Grip Primer

Forcrete — Monogrip

Comprehensive guide for preparation, application, and drying times for Monogrip adhesion primer.

💡 About Monogrip:
Monogrip is a water-based, blue/green 1-component grip primer containing fine silica aggregate. It is used on low-absorbency wall surfaces such as painted substrates, vinyl (preferably DPM), and thoroughly ground ceramic tiles to provide mechanical keying and ensure optimal adhesion before applying Monostone XL or L.
📱 Coverage & Drying Time:
• Material Consumption: Approx. 100 g/m².
• Drying Time: Approx. 30–60 minutes (until the surface is completely dry and textured).
• Application Tool: Apply using a short-pile roller or microfiber roller.
⚠️ Important Information Before Starting:
• Working Temperature: Material, substrate, and ambient air temperatures must remain between +10 °C and +25 °C.
• Mixing: Ready to use; shake the bucket thoroughly before use to ensure the silica aggregate is evenly suspended.
• Storage: Store frost-free. Shelf life is 12 months in unopened original packaging.
• Container Management: Reseal tightly immediately after decanting the required quantity.

1. Substrate Preparation

1.
Substrate Inspection: The surface must be sound, dry, and free from dirt, oil, and grease.
2.
Grinding and Vacuuming: Diamond-grind tiles to abrade and remove the glaze. Sand painted surfaces to a dull, matte finish. Always vacuum all grinding dust thoroughly before rolling primer.

2. Application

Rolling the Primer
• Application: Pour the primer into a paint tray and roll an even, fully covering coat across the surface.
• Distribute Aggregate Evenly: Disperse the silica sand uniformly without thick ridges, puddling, or runs.
• Drying Time: Allow to dry for approx. 30–60 minutes until completely dry, rough to the touch, and tack-free.

3. Next Steps

Select the guide for the next phase of your build-up based on your chosen finish or substrate:

🛑 Health & Safety Equipment:
• Wear nitrile protective gloves during handling and application.
• Wear safety goggles to protect against splashes.
• Ensure continuous, adequate workspace ventilation and keep out of reach of children.
⏱️ Drying Times & Tool Maintenance:
• Drying Time Prior to Plastering: 30–60 minutes.
• Cleaning: Clean rollers, paint trays, and tools with clean water immediately after use before the primer cures.

Documents & Technical Datasheets

📄 Technical Documentation: Forcrete Monogrip

How did we do?

FC - Microquartz (ENG)

FC - Monoprime (ENG)