Skip to main content

TT - Application on Waterproofing Membranes (ENG)

How to prepare an approved wet-room waterproofing membrane for Topciment: drain grate, tile adhesive skim and primer.

tomas martinsson
Updated by tomas martinsson
Guide / Wetrooms

Directly on Waterproofing Membranes: Application & Preparation

Guidance for floor drain grate installation, adhesive bed skimming, and surface preparation over waterproofing membranes.

🛑 Before commencing the project:
• Substrate Preparation & Cleanliness: Ensure the surface is sound, dry, and thoroughly cleared of dirt and grease.
• Working Temperature: Ambient and substrate temperatures must be maintained between +10 °C and +25 °C throughout installation and curing.
• Scope: This guide does not cover the installation of the waterproofing membrane itself, but details the preparatory workflow once an approved membrane system is certified in place.
• Recommended Systems: We recommend Kiilto or Zebra systems as they formally approve our products. Zebra provides detailed installation manuals and quality assurance documentation for microcement applications.

1. Installation & Moisture Protection of Floor Drain Grate

Grate Installation

Bond the drain grate directly to the waterproofing membrane using an approved moisture-curing adhesive (such as Tec7 or as specified by the membrane manufacturer). Note that Zebra requires a dedicated Purus grate frame designed for microcement.

Moisture Barrier When Coating Floors Only (Primapox 100 Barrier)

Normally, the floor is installed prior to wall tiling so water cannot migrate behind the floor screed. If wall finishes are already completed and the floor is coated retrospectively, bed the grate in tile adhesive and seal it completely with Primapox 100 Barrier to create an impermeable seal. This epoxy barrier prevents water from being drawn backwards beneath the grate rim, which otherwise causes dark moisture staining in the cement matrix.

2. Tile Adhesive Skimming & Technique

Walls

Tile adhesive is applied to secure a strong mechanical key against the waterproofing membrane and to level out sheet lap joints. Because microcement only builds 2–3 mm, proud membrane seams will telegraph through the finished surface if left unskimmed.

Floors

Skim tile adhesive flush with the top edge of the drain grate (e.g. 4 mm for mosaic frames, 6 mm for standard grates). Utilizing a low-profile microcement grate minimizes the required adhesive thickness. Excessive adhesive depth increases curing stress and shrinkage cracking risks.

Technique for Planar Skimming

Comb the adhesive using a notched trowel across the substrate, taking care not to comb directly over membrane overlaps. Once the combed bed is firm, fill the ridges with a tight flat skim coat. On floors, choose a notch size that accommodates the grate height plus a couple of millimeters to avoid counter-falls. Smooth the surface a second time if necessary to ensure no grooves remain.

Wall-Adjacent Linear Drains

Wall-adjacent drains frequently require a thicker adhesive build-up. We recommend increasing floor falls by a few millimeters in the shower zone during the screeding phase to prevent having to float out thick adhesive beds across the rest of the room. Consult your waterproofing supplier regarding embedding fiberglass mesh into the adhesive bed when thicker coats are required.

3. Priming Prior to Microcement

Through-Drying of Tile Adhesive

Ensure the adhesive bed is fully dry through its entire thickness before moving to the next stage. Moisture trapped beneath the microcement causes shrinkage tension and cracks that mirror into the surface finish. Use rapid-setting adhesive on floor areas to ensure reliable through-drying.

Priming (Acricem Resin)

Once the adhesive is completely dry, prime the substrate with Acricem Resin to consolidate the surface and form a chemical bonding bridge. Then, adhere the reinforcement mesh to the surface using Primacem Plus before troweling the first coat of Microbase.

How did we do?

TT - Application on Vinyl (ENG)

TT - Fiberglass Mesh & Reinforcement Guide (ENG)