Skip to main content

TT - Primer Selection Guide (ENG)

Choose the Topciment primer based on how absorbent the substrate is and whether it needs a DPM.

tomas martinsson
Updated by tomas martinsson
Guide / Material Selection

Primer Selection for Microcement — Topciment

Select the correct primer based on substrate porosity, moisture conditions, and chosen system build-up.

💡 About Primers:
Primers bind surface dust, regulate substrate suction, and ensure optimal adhesion and bonding for the microcement matrix. Selection is determined by background porosity and whether moisture barrier protection is required.
🛑 Before commencing the project:
• Substrate Preparation: Ensure the surface is sound, dry, and thoroughly cleared of contaminants and grease.
• Working Temperature: Ambient and substrate temperatures must be maintained strictly between +10 °C and +25 °C throughout application, drying, and curing.
• Always allow primers to dry or cure completely before proceeding to subsequent stages. Specific drying times are listed in the product sections below.

1. Primers for Walls & Porous / Non-Porous Substrates

Primacem Plus

Adhesion-promoting primer with tack for non-porous surfaces, painted areas, and pre-primed substrates (e.g. vinyl flooring or tiles primed with Ardex P4). Used to adhere and hold the reinforcement mesh firmly in place before skimming the first base coat.

⏱️ Drying Time: approx. 30 min | ⚖️ Coverage: approx. 0.10 l/m²
Instructions: Primacem Plus ↗
Primacem ABS

Water-based acrylic dispersion for porous building boards and masonry (plasterboard, render, chipboard, and MDF). Regulates absorption to prevent premature water loss from the freshly applied microcement.

⏱️ Drying Time: approx. 30–60 min | ⚖️ Coverage: approx. 0.10 l/m²
Instructions: Primacem ABS ↗

2. Primers for Concrete & Moisture Barrier Epoxy

Acricem Resin

Pure acrylic resin for concrete, tile adhesive, and cementitious screeds. Used as an adhesion primer prior to microcement application and as the liquid component when batch mixing Microbase. Ensures dependable mechanical bonding.

⏱️ Drying Time: approx. 30–60 min | ⚖️ Coverage: approx. 0.10 l/m²
Instructions: Acricem Resin ↗
Primapox 100 Barrier

100% solids, moisture-tolerant 2-component epoxy primer engineered to block rising damp and moisture migration. Mandatory when installing microcement on bathroom floors only or surrounding drain grates bedded in adhesive to ensure an impervious seal.

⏱️ Curing Time: 12–24 hours | ⚖️ Coverage: approx. 0.25–0.35 kg/m²
Instructions: Primapox 100 Barrier ↗

3. Quick Reference: Substrate to Primer

Substrate
Primer
Method & Function
Tiles & Pavers
Ardex P4
Creates a rough mechanical key
Vinyl Flooring & Painted Surfaces
Primacem Plus
Adheres and fixes mesh
Plasterboard & Timber Boards
Primacem ABS
Seals porous backgrounds
Concrete, Tile Adhesive & Screed
Acricem Resin
Consolidates and ensures chemical bond
Bathroom Floors Only / Drain Grate
Primapox 100 Barrier
Moisture barrier against trapped water
ℹ️ Primacem Plus can also be used over pre-primed absorbent surfaces to tack-bond the reinforcement mesh.

How did we do?

TT - Fiberglass Mesh & Reinforcement Guide (ENG)

TT - Substrate Preparation on Tiles (ENG)