Skip to main content

TT - Sanding Guide (ENG)

Which tool and grit to use in each phase with Topciment, from the substrate to the last sanding before sealer.

tomas martinsson
Updated by tomas martinsson
Guide / Sanding Technique

Sanding Guide: From Substrate to Finished Surface (Topciment)

Instructions for tooling, abrasives, and techniques arranged by project phase.

🛑 Before commencing the project:
• Working Temperature: Ambient and substrate temperatures must be maintained strictly between +10 °C and +25 °C.
• Substrate & Cleanliness: Ensure the surface is sound, dry, and thoroughly cleared of contaminants and grease prior to every subsequent stage.
• Dust Cleaning Routine: Vacuum the surface thoroughly and wipe down with a dry microfiber cloth after every sanding operation. Residual sanding dust cuts deep scratches or creates permanent dark discolouration underneath the sealer.

1. Substrates (Tiles, Pavers & Screed)

Tiles & Pavers

Grind tiles using a concrete grinder fitted with a diamond cup wheel. This keys the glazed surface to ensure mechanical adhesion and flushes down proud tile edges.

Self-Leveling Screed

Prior to applying primer, sand self-leveling screed with 40-grit abrasives to break surface laitance and open the pores so the primer penetrates evenly.

2. Base Coats (Microbase)

Abrasives & Diamond Pads

Use 40-grit sandpaper or a 50-grit diamond pad on a random orbital sander. When using diamond pads, operate at low RPM and apply minimal downward pressure to avoid premature pad wear.

Corners & Angles

Sand internal and external corners straight by hand using folded abrasive paper. On the initial base coat, an oscillating multi-tool with a diamond blade may be utilized to dress up internal corners; this is strictly permitted on the first coat only.

3. Finish Coats (Microdeck & Microfino)

Microdeck

Sand with 80-grit on a random orbital sander. For detail areas and perimeters, sand with 120-grit by hand. Sand with care to avoid cutting through and exposing the base coat.

Microfino

Sand gently with 120-grit on a random orbital sander. For hand-sanding along corners and borders, use 180–240 grit to produce a uniform surface with a refined texture.

4. Intermediate Sanding & Sealer Preparation

Final Sanding Prior to Presealer

Precision final sanding: Sand smooth and planar using fine abrasives. Clear topcoats do not conceal imperfections; they accentuate underlying defects.

Intermediate Sanding Prior to Topcoat

De-nib the surface very lightly with 400-grit abrasive paper by hand (or at low RPM by machine without pressure) immediately before applying Topsealer Dragon. This de-nibs fibers and ensures inter-coat adhesion. This step is not carried out prior to TT Presealer.

How did we do?

TT - Mixing and Pigmentation (ENG)

TT - Sealer Selection Guide (ENG)