TT - Sealer Selection Guide (ENG)
All resistance to water, stains and wear comes from the sealer. Here you choose the sealer system and prepare the surface.
Updated
by tomas martinsson
Overview / Sealing
Sealer Selection & Protection
Overview and guidance for selecting the right method and sealer. All protection against water, staining, and abrasion relies on the sealing coats.
đ Before commencing the project:
⹠Working Temperature: Ambient and surface temperatures must be maintained strictly between +10 °C and +25 °C throughout application and curing.
âą Roller Selection: Always use Microstar 8 mm or Anza Platinum Pro (6â8 mm short-pile lint-free microfiber). Selecting the wrong roller is the leading cause of application defects and uneven sheen.
âą Ventilation: Ensure adequate air exchange during work. Final topcoats must cross-link and cure naturally without fan heaters.
⹠Working Temperature: Ambient and surface temperatures must be maintained strictly between +10 °C and +25 °C throughout application and curing.
âą Roller Selection: Always use Microstar 8 mm or Anza Platinum Pro (6â8 mm short-pile lint-free microfiber). Selecting the wrong roller is the leading cause of application defects and uneven sheen.
âą Ventilation: Ensure adequate air exchange during work. Final topcoats must cross-link and cure naturally without fan heaters.
1. Select the Right System for Your Project
Topciment Sealers
Maximum Wear Resistance
Polyurethane system offering maximum chemical resistance and durability in wet zones to form an impermeable moisture barrier.
âą Topsealer Dragon: Two-component PU topcoat for all areas in selected sheen level.
âą TT Presealer: Standard pore-sealing primer (2 coats) for floors and walls that preserves natural texture.
âą Topsealer Pro-Plus: Enhanced barrier primer for worktops, dining tables, and metallic finishes.
âą Drying & Curing: Refer to specific product documentation for exact recoat and curing intervals.
âą TT Presealer: Standard pore-sealing primer (2 coats) for floors and walls that preserves natural texture.
âą Topsealer Pro-Plus: Enhanced barrier primer for worktops, dining tables, and metallic finishes.
âą Drying & Curing: Refer to specific product documentation for exact recoat and curing intervals.
DC Titan Sealers
Fast & Vapor-Permeable
Fast-drying, breathable polyurethane sealer, ideal for basement floors on ground and fast-track schedules.
âą Titan Topsealer: Water-based PU topcoat with high resistance to traffic and mechanical loads.
âą Titan Presealer / Titan Cream: Diluted with 10â20% water. Titan Cream is strongly recommended on bathroom floors.
âą Workflow: Recoat intervals and intermediate sanding instructions are detailed in the product guides.
âą Titan Presealer / Titan Cream: Diluted with 10â20% water. Titan Cream is strongly recommended on bathroom floors.
âą Workflow: Recoat intervals and intermediate sanding instructions are detailed in the product guides.
2. General Preparation Before Sealing
âą Meticulous Final Sanding: Sand the surface smooth and planar using fine abrasives. Clear sealers do not fill depressions; they highlight and magnify all substrate imperfections. Always inspect under bright task lighting.
âą Grit Selection for Finish Coats: Sand Microdeck with 80-grit (machine) or 120-grit (hand). Sand Microfino with 120-grit (machine) or 240-grit (hand). Sand perimeters and corners delicately by hand.
âą Vacuuming & Cleaning: Vacuum the entire area using a soft brush nozzle. Tack-wipe the entire surface thoroughly with a dry microfiber cloth. Every trace of sanding dust must be removed to avoid dark, cloudy discolouration under the cured film.
âą Grit Selection for Finish Coats: Sand Microdeck with 80-grit (machine) or 120-grit (hand). Sand Microfino with 120-grit (machine) or 240-grit (hand). Sand perimeters and corners delicately by hand.
âą Vacuuming & Cleaning: Vacuum the entire area using a soft brush nozzle. Tack-wipe the entire surface thoroughly with a dry microfiber cloth. Every trace of sanding dust must be removed to avoid dark, cloudy discolouration under the cured film.
đĄïž Health & Safety & Tool Maintenance:
âą Personal Protection: Wear protective nitrile gloves and safety goggles when measuring, handling, and mixing sealers and hardeners. Always wear an approved particulate respirator during all sanding operations.
âą Tool Cleaning: Clean tools thoroughly with water immediately after use before materials dry. Once cured, remove sealer residues using acetone or cleaning solvent wipes.
âą Personal Protection: Wear protective nitrile gloves and safety goggles when measuring, handling, and mixing sealers and hardeners. Always wear an approved particulate respirator during all sanding operations.
âą Tool Cleaning: Clean tools thoroughly with water immediately after use before materials dry. Once cured, remove sealer residues using acetone or cleaning solvent wipes.
How did we do?
TT - Sanding Guide (ENG)