TT - Pure Mettal (ENG)
Two-component metal coating for walls and decorative surfaces, indoors and outdoors. Not for floors.
Topciment — Pure Mettal
Two-component metallic coating for walls and architectural feature surfaces indoors and outdoors. Not suitable for flooring installations.
• Substrate & Cleanliness: Ensure the surface is sound, dry, and free of dirt, oil, and grease.
• Substrate Must Be Level: Can be applied directly onto smooth, painted drywall surfaces. No microcement base coat is required on decorative feature walls.
• Working Temperature: Ambient room and substrate temperatures must remain between +10 °C and +25 °C throughout.
• Sample Board: Always produce a mockup board with your chosen finishing system prior to full application. Metallic coatings are artisan finishes; textures and patina variations develop uniquely.
• Surface Texture: For a high-polish metallic shine, trowel the surface completely smooth and flat. For oxidation (rust/patina effects), leave subtle texture and relief so the patina is protected down in the recesses during burnishing.
1. Mixing Ratios by Weight
2. Application
3. Post-Treatment Options
Develops authentic weathered rust or verdigris patina effects.
2. Apply the oxidation activator using a roller, sponge, or spray bottle.
3. Allow 3 hours reaction time. Repeat application if more pronounced oxidation is desired.
4. Allow to dry for 24 hours before burnishing or sealing.
Brings out the natural metallic luster and brilliant sheen of the alloy.
2. Burnish methodically in ascending grits: 400 → 800 → 1500 → 3000 grit sandpaper.
3. Wipe the surface down meticulously with a dry microfiber cloth between each grit sequence so abrasive dust does not scour the polished luster.
4. Sealing and Surface Protection
On decorative feature surfaces free from water exposure, finishing with wax preserves the raw metallic depth and brilliant optical luster to the highest degree.
Combine Topsealer Pro-Plus (barrier coat) with TT Topsealer Dragon for surfaces subject to water splashing.
Documents and Technical Datasheets
- Technical Datasheet (TDS) (PDF) ↗
- Safety Datasheet (SDS): Coming soon, contact Designcement
• Protective Equipment: Wear nitrile gloves and safety glasses during all handling. Always wear respiratory protection (P2/P3) when dosing metallic powder and during all sanding and burnishing stages. Ensure continuous, adequate workspace ventilation.
• Tool Cleaning: Clean tools immediately with water after use before the material sets. For dried residue, clean tools with acetone or solvent wipes.
How did we do?
TT - Primapox 100 Barrier (ENG)
TT - Topsealer Dragon (ENG)