Skip to main content

TT - Primacem Plus (ENG)

Bonding primer for non-absorbent substrates such as vinyl and stone, and adhesive for the reinforcement mesh.

tomas martinsson
Updated by tomas martinsson
Product Guide / Primer

Topciment — Primacem Plus

Adhesion bonding primer for non-absorbent substrates and for rolling down fiberglass reinforcement mesh.

🛑 Before You Begin:
• Substrate & Cleanliness: Ensure the surface is sound, dry, and free of dirt, oil, and grease.
• Substrate Must Be Level: Microcement is applied in very thin coats and will not conceal underlying depressions, hollows, or height discrepancies.
• Working Temperature: Ambient room and substrate temperatures must remain between +10 °C and +25 °C throughout.
• Reinforcement Mesh: Fiberglass mesh must always be installed before troweling the first base coat.

1. Suitable Substrates and Function

Non-Absorbent Substrates

Use Primacem Plus on non-absorbent substrates. The product is used on ceramic tiles, porcelain tiles, worktops, laminates, and other non-porous surfaces.

Bonding Reinforcement Mesh

Primacem Plus features tackifying polymers and is also used to roll down fiberglass reinforcement mesh directly onto the substrate. On porous substrates, saturate the surface first with Primacem ABS or Acricem Resin; once dry, roll the mesh down with Primacem Plus.

2. Application and Drying Times

Application

Apply the primer evenly in 1 fully covering coat with a roller or brush without leaving dry spots. When installing mesh, roll the primer directly through the mesh to adhere it firmly to the substrate.

Drying Times

The primer is touch-dry after approximately 20–30 minutes at standard room temperature (use a circulation fan if needed). Wait at least 30 minutes for the film to develop adequate tack and adhesion. Trowel the first base coat within 24 hours of priming.

3. Next Steps: Reinforcement and Base Coat

Once the mesh is secured and the primer has dried, embed the mesh with the first base coat:

Documents and Technical Datasheets

📄 Technical Documentation: Primacem Plus
🛡️ Health & Safety Equipment & Tool Care:
• Protective Equipment: Wear protective gloves and safety goggles during handling and application. Ensure adequate room ventilation.
• Tool Cleaning: Clean tools and rollers thoroughly with water immediately after use before the primer dries. For dried residue, clean tools using acetone or wipes.

How did we do?

TT - Primacem ABS (ENG)

TT - Primapox 100 Barrier (ENG)