Skip to main content

FC - General Information About the Mixing App (ENG)

How to use the mixing app for Forcrete. The three parts of the app, consumption, pigmentation and mixing, are used in that order.

tomas martinsson
Updated by tomas martinsson
User Manual / App Guide

Forcrete — General Information About the Mixing App

Overview and guidance for the app's three functions: material coverage, pigmentation, and final mixing prior to application.

ℹ️ About the Mixing App: The app is a digital tool designed to ensure precise ratios between hardener, powder, pigment, and water. Always read through the technical instructions for each specific product prior to starting.

The App's Three Functions

1. Coverage / Layer Step 1: Planning

Used to calculate the required material volume for a specific surface area (m²). Always begin here to determine consumption rates and calculate how much material needs to be weighed out for each individual layer.

2. Pigmentation Step 2: Preparation

Select your product and color to obtain the exact amount of pigment and water required for the powder (Component A). To ensure consistent, accurate color results, it is always recommended to pre-pigment full buckets.

3. Mixing Prior to Application Step 3: Final Mix

Used at the time of application to calculate the exact amount of hardener (Component B) and any supplementary water. This tab is primarily used for partial mixes (e.g. when mixing 1/2 or 1/3 bucket at a time), but also works when fine-tuning the water ratio for full units.

💡 Color Consistency Recommendation:
Always pigment the material in advance and let it rest for at least 2 hours (preferably overnight). Smaller partial pigmentations should strictly be reserved for the initial base coat or sample boards, as smaller batches carry an increased risk of color variation.

How did we do?

FC - Mixing Cement Prior to Application (ENG)