FC - Pigmentation in the App (ENG)
How the mixing app calculates pigment and water when you pigment Forcrete, for a full bucket or a smaller amount.
Updated
by tomas martinsson
User Manual / App Guide
Forcrete — Pigmentation in the App
Instructions on how to calculate pigment and water quantities in the mixing app when preparing Forcrete.
1. App Data Entry Step-by-Step
1.
Are you pigmenting a full bucket?
• Select YES if pigmenting the entire container directly.
• Select NO if pigmenting a smaller partial amount.
Recommendation: Always pigment full buckets to guarantee precise color accuracy. Partial pigmentations can be used on the first base coat to save material or when preparing color samples (keep potential slight color variations in mind).
• Select NO if pigmenting a smaller partial amount.
Recommendation: Always pigment full buckets to guarantee precise color accuracy. Partial pigmentations can be used on the first base coat to save material or when preparing color samples (keep potential slight color variations in mind).
2.
Enter quantity of Component A (if NO in step 1):
If you selected not to pigment a full bucket, enter here how many kg of cement (Comp A) will be pigmented.
3.
Select material: Choose the product to be pigmented (e.g., Microbase XT or Microquartz).
4.
Select shade: Choose the color shade to be used in the project.
2. Calculation Page (Results)
In the upper box, you will see your selections from the previous step. Always verify that the material and color shade match before weighing out the pigment.
Pigment & Water Quantities
The lower box displays the exact amount of pigment (in grams) to be added. For the powder to absorb the pigment and dissolve evenly, clean water must also be added during mechanical mixing.
Guidelines for water volume during pigmentation:| Pigment Quantity | Recommended Water Volume |
|---|---|
| Under 100 g pigment | Approx. 100 g water |
| 100 g to 300 g pigment | Approx. 150 g water |
| Over 300 g pigment | Approx. 200–250 g water |
✍️ Always note the water quantity on the bucket:
Write the exact grams of water added directly onto the lid or side of the bucket. This value must be entered into the app later when adding the hardener (Component B).
⏳ Resting Time: Allow the pigmented cement to rest for at least 2 hours (preferably overnight) before adding hardener, ensuring the pigment dissolves completely.
Write the exact grams of water added directly onto the lid or side of the bucket. This value must be entered into the app later when adding the hardener (Component B).
⏳ Resting Time: Allow the pigmented cement to rest for at least 2 hours (preferably overnight) before adding hardener, ensuring the pigment dissolves completely.
How did we do?
FC - Mixing Cement Prior to Application (ENG)
TT - Using the Mixing App (ENG)