FC - Mixing Cement Prior to Application (ENG)
How to fill in the mixing app just before you trowel, and how to read the amounts of hardener and water it calculates.
User Guide: Mixing App
Instructions for data entry, mixing, and interpreting calculated quantities in the app.
Data Entry Step-by-Step
- Select shade: Choose the color shade you have prepared for the project.
- Select material: Choose the product you are mixing (e.g., Microbase XT, Coarse, Medium, Smooth, or Trowel X).
-
Are you mixing the entire bucket directly?
• Select YES if mixing the entire container at once (typical for larger floor areas). Then proceed directly to Step 9.
• Select NO if mixing a smaller batch. In bathrooms and on smaller surfaces, it is most common to mix 1/2 or 1/3 bucket at a time. Continue to Step 5. -
Did you pigment a full bucket during preparation? (Displayed if you selected NO in step 3)
• Select YES if the full bucket was pigmented beforehand. Jump to Step 8.
• Select NO if you only pigmented a smaller portion of the bucket. Proceed to Step 5.
Recommendation: Always pigment full buckets to guarantee precise color accuracy. With smaller quantities, color deviations may occur. -
How many kg of Component A did you pigment in total? (Displayed if you selected NO in step 4)
Enter how many kg of Component A you prepared during pigmentation (for example, 2.5 kg). This refers to the total amount you prepared, not what you are measuring out right now.
-
How much will you mix in this batch?
Enter the amount of cement you are mixing now (e.g., 1 kg from the 2.5 kg that was pigmented).⚠️ Important regarding weight: Because water and pigment have already been mixed into the powder, this must be included in the total weight. Always weigh out the material on the scale and enter the exact display reading—do not deduct the weight of pigment, water, etc.
💡 Good to know: An empty bucket weighs approx. 320 g without lid. -
How much water did you add during pigmentation?
Enter exactly how much water (in grams) you added when the powder was pigmented.
-
What total % water do you want in the mix?
Most applications require between 3% and 10% total water content. Choose the percentage based on substrate and application technique:
Material Wall Floor / Special Technique Microbase XT 2–3% (gives higher build) 4–6% (gives thinner coats) Microquartz Coarse 4–6% 5–6% (7–8% with rubber squeegee) Microquartz Medium 3–5% 4–6% (7–8% when rolling) Microquartz Smooth 3–5% 4–6% Trowel X Base Always 4–6% Trowel X L Always 4–4.5%
Results & Mixing Recipe
At the top of the calculation page, a summary of product, color, and input values is displayed. Always verify that the details match your inputs.
The cement must rest for at least 2 hours after the pigment has been added. The material needs to settle properly before adding the hardener (Component B). Pigmenting the buckets the day before is highly recommended.
Weigh out and add the specified amount of hardener.
Important: The hardener must always be mechanically stirred into the cement before adding extra water.
Based on your selected water percentage, the app shows exactly how much extra water to pour into the mix.
Calculation: Do not manually deduct the water from pigmentation—the app has already subtracted it automatically.
How did we do?
FC - General Information About the Mixing App (ENG)
FC - Pigmentation in the App (ENG)