Skip to main content

FC - Forshield FX (ENG)

Ready-mixed pore filler troweled thinly before the topcoat. Replaces the first coat of sealer and gives a smoother surface.

tomas martinsson
Updated by tomas martinsson
Guide / Sealer & Pore Filler

Forcrete — Forshield FX

Practical guide for pore filling and pre-treatment with Forshield FX prior to final topcoat sealing.

💡 About Forshield FX:
Forshield FX is a ready-mixed, 1-component microcement paste engineered to fill micro-pores. The product replaces the first coat of topcoat sealer, creating a smoother touch and a more subdued, uniform visual appearance.
  • Applications: Applied as the first coat on smooth surfaces to create a calmer, more homogeneous appearance, and always as the initial sealer coat on Microstone and Microgranite in dry areas.
  • Characteristics: Seals micro-pores. Can be used as supplied or tinted with FX metallic pigments for bespoke decorative effects.
  • Method: Forshield FX is always applied as Coat 1 and subsequently sealed with Forshield 2KWB or Forshield Ultra as the final topcoat.
📱 Coverage & Specifications:
• Form: Ready-mixed 1-component paste.
• Coverage: Approx. 60–80 g/m² (applied in 1 tight coat).
• Tools: Plastic trowel or flexible rubber squeegee.
⚠️ Important Information Before Starting:
• Working Temperature: Material, substrate, and ambient temperatures must remain between +10 °C and +25 °C.
• Storage: Protect from freezing. Shelf life is 12 months in unopened original packaging.
• Pot Life / Open Time: Approximately 60 minutes at +20 °C once the tub is opened.

1. Preparation

1.
Drying Time: The microcement must have cured and dried for at least 18 hours before application begins.
2.
Sanding: Sand the surface according to the desired finish profile. Floor surfaces can be left slightly more open when using FX as it fills voids; however, excessively coarse surfaces will still be difficult to maintain and look incomplete.
3.
Vacuuming & Wiping: Vacuum and dry-mop the substrate meticulously. Wipe down the entire surface with a dry microfiber cloth to remove all sanding dust.

2. Mixing

🧪 Handling:
• The 1-component paste is pre-mixed and ready to apply directly onto the microcement.
• If incorporating FX Pigment (Metallic): mix thoroughly with a mechanical paddle mixer at low speed for at least 3 minutes until color distribution is completely uniform.

3. Application

1.
Trowel Application: Draw the paste out tightly and evenly using a plastic trowel or flexible rubber squeegee. Work the material firmly into the substrate pores without building film thickness on the surface (maintain approx. 45° blade angle with light pressure).
2.
Full Coverage (No Missed Spots): Ensure 100% continuous coverage without holidays. Any missed spot will cause a noticeable shade variation once the topcoat is applied. Step back periodically to inspect coverage across the entire area.
3.
Scrape Flush (No Ridges): Leave no ridges or heavy edges; excess material will remain soft and show through the topcoat. Scrape tight so only the open pores are filled.
4.
Spot Touch-ups: If a holiday is identified, touch it in easily using a fingertip and allow to dry. The touch-up will blend invisibly, but note that the drying time must be observed before sealing.

Drying Times & Next Steps: Final Topcoat

• Foot Traffic / Light Traffic: Surface is accessible after approx. 2 hours.
• Drying Time Prior to Topcoat: Allow Forshield FX to dry for approx. 3 hours before applying Forshield 2KWB or Forshield Ultra.
• Intermediate De-nibbing (Recommended): For optimal finish quality, lightly de-nib the surface using a 180–220 grit sanding screen and dry-mop with a microfiber cloth before rolling 2KWB topcoat.
🛑 Health & Safety Equipment:
• Wear nitrile gloves and safety glasses during handling.
• Clean tools with clean water immediately after use while the paste is still wet.
• Protect from freezing and keep out of reach of children.

Documents & Technical Datasheets

📄 Technical Documentation: Forcrete Forshield FX

How did we do?

FC - Forshield 2KWB / 2KWB Ultra (ENG)

FC - Forshield PA Clear (ENG)